Air handling unit

including pre-filter, fan with EC motor and heating coil

with electric or water heating coil – compact design
incl pre-filtering – flexible installation – including pre-filtering, control unit and control system

Type WPZ-9ED / 400V

Air handling unit with high-efficiency EC fan - incl control technology (pre-programmed) - electric heating coil
Volume flow up to 2.800m³/h

Info

Low energy consumption due to energy-efficient EC motors
integrated and pre-programmed control
self-supporting construction with 30 mm sound and heat insulation
100% controllable by 0-10 V signal. Integrated potentiometer for speed control
Built-in motor ventilation flaps
Low height enables installation in false ceilings
For outside air temperatures below -2°C we recommend an external duct preheater coil
Quiet and durable device
Compact dimensions, housing powder coated in RAL 7040 gray
Not suitable for outdoor installation

Type WPZ-15E / 400V

with highly efficient EC fan - incl control technology (pre-programmed) - electric heating coil
Volume flow up to 2.800m³/h

Info

Type WPZ-54W

with highly efficient EC fan - incl control technology (pre-programmed) - hot water heating coil
Volume flow up to 2.800m³/h

Info

Type WAZ-18ED

Ventilation unit with heat recovery and high-efficiency EC fan - incl. Control -
Volume flow up to 2,700m³/h

Info

Low energy consumption due to efficient EC motors
Built-in motor ventilation flaps
Built-in pressure sensor for filter monitoring
Low height enables installation in false ceilings
Mounting possible in any position (condensate pump may be required)
For outside air temperatures below -2°C we recommend an external duct preheater coil
Quiet and durable device
Compact dimensions, housing powder coated in RAL 7040 gray
Plug & Play – easy assembly and installation
Not suitable for outdoor installation
other versions, volume flows etc. on request

Type WAZ-6ES

Ventilation unit with heat recovery, electric heating coil and high-efficiency EC fan - incl. Control -
Volume flow up to 4.000m³/h

Info

Low energy consumption due to efficient EC motors
Built-in motor ventilation flaps
Built-in pressure sensor for filter monitoring
Low height enables installation in false ceilings
Mounting possible in any position (condensate pump may be required)
For outside air temperatures below -2°C we recommend an external duct preheater coil
Quiet and durable device
Compact dimensions, housing powder coated in RAL 7040 gray
Plug & Play – easy assembly and installation
Not suitable for outdoor installation
other versions, volume flows etc. on request

Type WAZ-40S

Ventilation unit with heat recovery and high-efficiency EC fan - incl. Control -
Volume flow up to 4.000m³/h

Info

Low energy consumption due to efficient EC motors
Built-in motor ventilation flaps
Built-in pressure sensor for filter monitoring
Low height enables installation in false ceilings
Mounting possible in any position (condensate pump may be required)
For outside air temperatures below -2°C we recommend an external duct preheater coil
Quiet and durable device
Compact dimensions, housing powder coated in RAL 7040 gray
Plug & Play – easy assembly and installation
Not suitable for outdoor installation
other versions, volume flows etc. on request

Type WAZ-15ES

Ventilation unit with heat recovery, electric heating coil and high-efficiency EC fan - incl. Control -
Volume flow up to 6.800m³/h

Info

Low energy consumption due to efficient EC motors
Built-in motor ventilation flaps
Built-in pressure sensor for filter monitoring
Low height enables installation in false ceilings
Mounting possible in any position (condensate pump may be required)
For outside air temperatures below -2°C we recommend an external duct preheater coil
Quiet and durable device
Compact dimensions, housing powder coated in RAL 7040 gray
Plug & Play – easy assembly and installation
Not suitable for outdoor installation
other versions, volume flows etc. on request

Type WAZ-60S

Ventilation unit with heat recovery and high-efficiency EC fan - incl. Control -
Volume flow up to 6.800m³/h

Info

Low energy consumption due to efficient EC motors
Built-in motor ventilation flaps
Built-in pressure sensor for filter monitoring
Low height enables installation in false ceilings
Mounting possible in any position (condensate pump may be required)
For outside air temperatures below -2°C we recommend an external duct preheater coil
Quiet and durable device
Compact dimensions, housing powder coated in RAL 7040 gray
Plug & Play – easy assembly and installation
Not suitable for outdoor installation
other versions, volume flows etc. on request

Type TOPVEX SC35-EL / 400V

Ventilation unit with heat recovery, electric heating coil and high-efficiency EC fan - incl. Control -
Volume flow up to 3,700m³/h

Info

with side connections and protective roof for outdoor installation
with a highly efficient counterflow heat exchanger
preconfigured ventilation unit
Available with water or electric heating coil
For outside air temperatures below -2°C we recommend an external duct preheater coil
incl. On-site commissioning of the device by service staff / Attention Installation must already have taken place! (in Germany – no islands etc / location must be clarified in advance)
other versions, volume flows etc. on request

Type TOPVEX SC35-EL / 400V

Ventilation unit with heat recovery, hot water heating coil and high-efficiency EC fan - incl. Control -
Volume flow up to 3,700m³/h

Info

with side connections and protective roof for outdoor installation
with a highly efficient counterflow heat exchanger
preconfigured ventilation unit
Available with water or electric heating coil
For outside air temperatures below -2°C we recommend an external duct preheater coil
incl. On-site commissioning of the device by service staff / Attention Installation must already have taken place! (in Germany – no islands etc / location must be clarified in advance)
other versions, volume flows etc. on request

Type TOPVEX SC60-EL / 400V

Ventilation unit with heat recovery, electric heating coil and high-efficiency EC fan - incl. Control -
Volume flow up to 5.800m³/h

Info

with side connections and protective roof for outdoor installation
with a highly efficient counterflow heat exchanger
preconfigured ventilation unit
Available with water or electric heating coil
For outside air temperatures below -2°C we recommend an external duct preheater coil
incl. On-site commissioning of the device by service staff / Attention Installation must already have taken place! (in Germany – no islands etc / location must be clarified in advance)
other versions, volume flows etc. on request

Type TOPVEX SC60-HW

Ventilation unit with heat recovery, hot water heating coil and high-efficiency EC fan - incl. Control -
Volume flow up to 5.800m³/h

Info

with side connections and protective roof for outdoor installation
with a highly efficient counterflow heat exchanger
preconfigured ventilation unit
Available with water or electric heating coil
For outside air temperatures below -2°C we recommend an external duct preheater coil
incl. On-site commissioning of the device by service staff / Attention Installation must already have taken place! (in Germany – no islands etc / location must be clarified in advance)
other versions, volume flows etc. on request

W-HRE series

Electric heating coil with integrated control for connection to DIN standard pipe systems

Info

for connection to DIN standard pipes
made of aluzinc-coated sheet steel with a stainless steel heating coil
with rubber lip seal
Vertical or horizontal installation possible
Horizontal installation only possible with plenum box upwards or at a 90 degree angle to the side
Minimum air speed 1,5m/s
fan must be available on site

Air handling unit type WPZ